LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Wiper System And Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the washer pump intake nozzle with washer solvent to aid in the installation of the washer pump (7) into the washer container.
  2. Secure the washer pump in the washer solvent container.
  3. Ensure the washer pump is secure to the washer solvent container.
  4. Connect the electrical connector (4) to the washer pump.
  5. Connect the washer hose (8) to the washer pump.
    Fig 1: Connecting Electrical Connector And Washer Hose To Washer Pump
    G02095194Courtesy of GENERAL MOTORS CORP.
  6. Install the lower air deflector. Refer to BODY FRONT END in Body Front End.
  7. Open the hood.
  8. Fill the washer solvent container with new washer solvent.
  9. Verify operation of the pump.
  10. Close the hood.
    Fig 2: Installing Lower Air Deflector
    G02095195Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals