LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Seat System) >> Repair Instructions >> Seat Switch Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat adjuster switch assembly to the seat switch bezel.
  2. Install the lumbar support switch to the seat switch bezel.
  3. Connect the electrical connectors.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws retaining the power seat switch bezel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    5. Fig 1: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals