LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Controls - 8.1L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Clean the fuel feed pipe connection and surrounding area prior to disconnecting the fitting in order to avoid possible fuel system contamination.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .
  2. Disconnect and remove the fuel feed line (1) from the sending unit and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
    Fig 1: Fuel Hose/Pipes Assembly
    GM1306291Courtesy of GENERAL MOTORS CORP.
  3. Cap the fuel feed and evaporative emission (EVAP) openings in order to prevent possible fuel/EVAP system contamination.
scientia non olet · About LEMON Manuals