LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the power steering pump pulley on the end of the power steering pump shaft.
  2. Install the power steering pump pulley using J-25033-C  .
    Fig 1: Installing Power Steering Pump Pulley Using J-25033-C
    G01217072Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the power steering pump pulley is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
    Fig 2: Ensuring Power Steering Pump Pulley & Power Steering Pump Shaft Are Flush
    G01217073Courtesy of GENERAL MOTORS CORP.
  4. Install the drive belt. Refer to Drive Belt Replacement in ENGINE MECHANICAL - 4.3L or Drive Belt Replacement - Accessory or Drive Belt Replacement - Air Conditioning in ENGINE MECHANICAL - 4.8L, 5.3L & 6.0L .
  5. Install the upper fan shroud. Refer to Fan Shroud Replacement in Engine Cooling .
scientia non olet · About LEMON Manuals