LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Charging System) >> Removal & Installation >> Generator >> Installation

Removal & Installation: Generator: Installation

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position generator near wiring harness connector and battery positive lead.
  2. Connect battery positive lead to generator and install the generator output BAT terminal nut. Tighten nut to specifications. See TORQUE SPECIFICATIONS . Tighten the generator output BAT terminal nut to 111 inch. lbs. (12.5 N.m).
  3. Press protective boot on to generator output BAT terminal.
  4. Connect wiring harness connector to generator.
  5. Position generator to mounting features on engine.
  6. Install generator mounting bolt. Tighten generator mounting bolts to 26 ft. lbs (35 N.m).
  7. Install drive belt tensioner.
  8. Install intake air resonator.
  9. Connect battery negative cable.
scientia non olet · About LEMON Manuals