Removal Procedure

Important:  Components of the DVD player cannot be serviced separately. Replace as an assembly.

1. Move the screen to the open position.
2. Remove the rear screw cover using a flat bladed tool.
3. Remove the four retaining bolts (2).
Fig 1: Removing Four Retaining Bolts
Courtesy of GENERAL MOTORS CORP.
4. Insert the J 38778  between the headliner and the DVD player assembly.
Fig 2: Removing DVD Player Assembly
Courtesy of GENERAL MOTORS CORP.
5. With 1 hand holding the DVD player assembly, pry the retainer from the bracket.
6. Allow the DVD player assembly to come to rest on the hook.

   Important:  Observe the routing of the wiring harness (2).

7. Disconnect the wire connector (1).
Fig 3: Disconnecting Wire Connector
Courtesy of GENERAL MOTORS CORP.
8. Slightly lift up the DVD player assembly so that the hook can be removed from its resting position.
9. Remove the DVD player from the vehicle.