Installation Procedure
- Install the DVD player hook (1) into the hook opening.
- Connect the wire connector (1) to the DVD player assembly.
Important: Ensure the harness is routed to the right side of the large plastic pin as shown (2).
- Install the harness retainer to the panel.
- Swing the rear part of the assembly to the headliner so that the retainer is seated.
- Install the two rear retaining bolts.
Tighten
- Tighten the 2 rear retaining bolts to 9 N.m (80 lb in).
- Move the screen to the open position.
- Install the 2 front retaining bolts (2).
Tighten
- Tighten the 2 front retaining bolts to 9 N.m (80 lb in).
- Install the rear screw cover.