Fastener Tightening Specifications
Fastener Tightening Specifications (1 Of 2)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accumulator Housing Cover Bolt | 8-14 N.m | 6-10 lb ft |
| Accumulator Housing to Channel Plate Bolt | 8-14 N.m | 6-10 lb ft |
| Bottom Pan to Case Bolt | 10-12 N.m | 8-9 lb ft |
| Case Cover to Case Bolt (10 mm) | 20-27 N.m | 15-20 lb ft |
| Case Cover to Case Bolt (13 mm) | 27-31 N.m | 20-23 lb ft |
| Case Cover to Case Stud (10 mm) | 20-27 N.m | 15-20 lb ft |
| Case Cover to Case Stud (13 mm)(47) | 27-31 N.m | 20-23 lb ft |
| Case Cover to Driven Sprocket Support Bolt | 20-27 N.m | 15-20 lb ft |
| Case Extension to Case Bolt (10 mm) | 20-27 N.m | 15-20 lb ft |
| Case Extension to Case Bolt (13 mm) | 50-55 N.m | 37-40 lb ft |
| Case Extension to Case Stud | 50-55 N.m | 37-40 lb ft |
| Case to Forward Clutch Support Stud | 25-27 N.m | 19-20 lb ft |
| Channel Plate to Accumulator Housing Bolt | 8-14 N.m | 6-10 lb ft |
| Channel Plate to Case Bolt | 8-14 N.m | 6-10 lb ft |
| Channel Plate to Case Nut | 8-14 N.m | 6-10 lb ft |
| Cooler Connector to Cooler - Case Cover | 20-27 N.m | 15-20 lb ft |
| Detent Lever and Roller Assembly Bolt | 8-14 N.m | 6-10 lb ft |
| Differential to Final Drive Carrier Bolt | 70-76 N.m | 52-56 lb ft |
Fastener Tightening Specifications (2 Of 2)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Drive Sprocket Support to Case Bolt | 11-13 N.m | 8-9.5 lb ft |
| Input Speed Sensor to Case Bolt | 11-13 N.m | 8-9.5 lb ft |
| LCVB to Channel Plate Bolt | 8-14 N.m | 6-10 lb ft |
| Manual Shaft to Detent Lever Nut | 27-34 N.m | 20-25 lb ft |
| Oil Drain-Bottom Pan to Case Cover Plug | 8-14 N.m | 6-10 lb ft |
| Oil Test - #40 TORX® - Case Cover Plug | 18-26 N.m | 13.5-19 lb ft |
| Oil Transfer Plate to Case Bolt | 8-14 N.m | 6-10 lb ft |
| Pressure Control Solenoid Bracket to UCVB Bolt | 11-13 N.m | 8-9.5 lb ft |
| Pump Assembly to Case Bolt | 11-13 N.m | 8-9.5 lb ft |
| Pump Assembly to Case Cover Bolt | 11-13 N.m | 8-9.5 lb ft |
| Return, Case, Cooler Connector | 25-29 N.m | 19-21 lb ft |
| Scavenge Pump Cover to Scavenge Pump Body Bolt | 11-13 N.m | 8-9.5 lb ft |
| Scavenge Tube to Case Bolt | 8-14 N.m | 6-10 lb ft |
| Secondary Pump to Case Bolt | 11-13 N.m | 8-9.5 lb ft |
| Secondary Pump to Case Cover Bolt | 11-13 N.m | 8-9.5 lb ft |
| Servo Cover to Case Bolt | 8-14 N.m | 6-10 lb ft |
| Side Cover to Case Cover Bolt (13 mm) | 20-27 N.m | 15-20 lb ft |
| Side Cover to Case Cover Bolt (15 mm) | 50-55 N.m | 37-40 lb ft |
| Side Cover to Case Cover Stud | 50-55 N.m | 37-40 lb ft |
| Spacer Plate Support to Channel Plate Bolt | 8-14 N.m | 6-10 lb ft |
| Speed Sensor to Case Extension Bolt | 8-14 N.m | 6-10 lb ft |
| Temperature Sensor | 3.4 N.m | 30 lb in |
| Transaxle Mount to Bracket Nut - Left | 75 N.m | 55 lb ft |
| Transaxle Mount to Bracket Nut - Rear | 40 N.m | 30 lb ft |
| Transaxle Mount Bracket to Transaxle Bolt - Left | 50 N.m | 37 lb ft |
| Transaxle Mount Bracket to Transaxle Bolt - Rear | 50 N.m | 37 lb ft |
| Transaxle Mount to Frame Bolt and Nut - Rear | 50 N.m | 37 lb ft |
| Transaxle Mount to Frame Rail Nut - Left | 70 N.m | 52 lb ft |
| UCVB to Case Bolt | 11-13 N.m | 8-9.5 lb ft |
| UCVB to Case Cover Bolt | 11-13 N.m | 8-9.5 lb ft |
| UCVB to Driven Sprocket Support Bolt | 11-13 N.m | 8-9.5 lb ft |