LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> DeVille Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Rearview Mirror Replacement >> Installation Procedure

Installation Procedure

  1. Position the center bottom of the rearview mirror (1) against the windshield at the top of the support button.
  2. Slide the base of the rearview mirror (1) onto the button.
    NOTE: Refer to FASTENER NOTICE
  3. Tighten the screw (3).

    Tighten 

    Tighten the screw (3) to 1.8 N.m (16 lb in) in order to secure the mirror base to the button.

  4. Install the base trim cover.
  5. Connect the electrical connector (2).
  6. Install the wire cover.
  7. Reposition the mirror assembly.
  8. Calibrate the mirror compass, if equipped with DD7. Refer to COMPASS CALIBRATION AND VARIANCE PROCEDURE  .
    Fig 1: Connecting Rear Window Electrical Connector
    G02101468Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals