LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Stabilizer Shaft Link To Lower Control Arm
    GM802013Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft link to the lower control arm.
  2. Install the stabilizer shaft link to the stabilizer shaft.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer shaft link retaining nuts.

    Tighten:  Tighten the nuts to 50 N.m (37 lb ft).

  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals