LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Rear Suspension System) >> Repair Instructions >> Adjustment Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Adjustment Link To Vehicle
    GM826490Courtesy of GENERAL MOTORS CORP.
  1. Install the adjustment link to the vehicle.
  2. Install the adjustment link to knuckle mounting bolt.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the adjustment link to frame mounting bolt.

    Tighten:  Tighten the bolts to 175 N.m (129 lb ft).

  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
  7. Adjust the rear toe. Refer to Rear Toe Adjustment in Wheel Alignment.