LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Electronic Suspension System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Air Dryer and Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the automatic level control air compressor from the vehicle. Refer to Air Compressor Replacement .
  2. Clean the area around the connection of the automatic level control air dryer to the automatic level control air compressor body.
  3. Disconnect the electrical connector from the pressure sensor.
  4. Remove the air dryer/pressure sensor assembly retaining screw.
  5. Push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly clockwise until the assembly detaches from the automatic level control air compressor body.
  6. Remove the automatic level control air dryer from the automatic level control air compressor.
scientia non olet · About LEMON Manuals