Removal Procedure
- Disable the SIR system. Refer to DISABLING SYSTEM in SIR.
- Remove the ignition switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle .
- Remove the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle .
- Remove the park lock cable from the lock cylinder housing.
- Remove 3 TORX® screws.
- Remove the lock cylinder housing from the steering column.
CAUTION:
Refer to SIR CAUTION
in Cautions and Notices.