Shift Lock Solenoid
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This following procedure is accomplished with steering column removed from vehicle. For adjustment in-vehicle adjustment, see SHIFT LOCK SOLENOID
under REMOVAL & INSTALLATION.
Shift lock solenoid is located on steering column. See Fig 1 . Pull locking tab outward from adjusting block. See Fig 2 . Press on adjusting block to disengage adjusting teeth. Slide adjuster block as far away from solenoid as possible. Lock adjuster block in place by pushing inward on tab. Ensure proper system operation.