LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Battery) >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Important:  When installing the battery negative cable, be sure that the cable eyelet is installed with the flat side down. Keep the crimped side facing upward.

  1. Connect the body end of the battery negative cable to the floor pan.

    Tighten 

    Tighten the battery negative cable to floor pan bolt to 36 N.m (27 lb ft).

  2. Connect the body harness connector to the body harness.
  3. Connect the battery negative cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE  .
    Fig 1: Installing Body End Of Battery Negative Cable To Floor Pan
    G02142339Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals