LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2001 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Wheel Stud
    G01784119Courtesy of GENERAL MOTORS CORP.
  1. Install a new wheel stud.
  2. Using washers and a wheel nut, pull the wheel stud into position.
  3. Install the brake rotor. Refer to FRONT BRAKE ROTOR .
  4. Install the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals