Adaptive Control

WARNING: This page is about a different car, the 2001 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Momentarily press top of lumbar switch where it is marked AUTO to activate adaptive seat function. Auto/on signal circuit of adaptive lumbar module is pulled low through switch contacts and ground. In response to this signal, adaptive lumbar module will inflate system as described above, take a reading, then automatically adjust comfort level to occupant by releasing air from bladders or adding air into bladders when needed. Adaptive lumbar module will check position of occupant every 4 minutes. If occupant has moved, adaptive lumbar module will then automatically adjust support. When lumbar switch is pressed down to OFF position to turn off automatic adjustment, off/down signal circuit of adaptive lumbar module is pulled low through switch contacts and ground. In response to this signal, adaptive lumbar module will release all air from bladders.