Test C: Charge Indicator Inoperative
- If diagnostic system check was not performed, perform ENGINE ELECTRICAL DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. If diagnostic system check was performed, go to next step.
- Turn ignition switch to RUN position. If charge indicator remains illuminated after 5 second bulb check, problem is intermittent. Check wiring and connections. See TROUBLE SHOOTING . If charge indicator does not remain illuminated after 5 second bulb check, go to next step.
- Replace Instrument Panel Cluster (IPC). See ANALOG INSTRUMENT PANELS - ELDORADO article. After repair, go to next step.
- Operate system to verify repair. If system is not operating correctly, repeat test beginning at step 2 .