LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2001 >> Eldorado ESC >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Programming >> Pass-Key(R) II Ignition Key >> 10 Minute Learn Procedure

10 Minute Learn Procedure

NOTE: A Tech 2 and Techline terminal with current Service Programming System (SPS) software is required.
  1. Connect Tech 2 to vehicle.
  2. Select REQUEST INFORMATION under SERVICE PROGRAMMING.
  3. Disconnect Tech 2 from vehicle and connect it to a Techline terminal.
  4. On Techline terminal, select THEFT MODULE RE-LEARN under SERVICE PROGRAMMING.
  5. Disconnect Tech 2 from Techline terminal and connect it to vehicle.
  6. Turn ignition switch to RUN position.
  7. Select VTD RE-LEARN under SERVICE PROGRAMMING.
  8. Attempt to start engine, then release key to RUN position (vehicle will not start).
  9. Observe SECURITY indicator. After 10 minutes, SECURITY indicator will turn off. Vehicle is now ready to relearn password on next ignition switch transition from OFF to START.
  10. Turn ignition switch to OFF position, and wait 5 seconds.
  11. Start engine. Vehicle has now learned password.
  12. Using Tech 2 scan tool, clear any DTCs.