LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2001 >> DeVille DTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Power Seat System) >> Repair Instructions >> Heated Seat Control Module Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heated seat control module (2) to the seat back.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the heated seat control module fasteners (1).

    Tighten 

    Tighten the rear heated seat control module to 1.5 N.m (13 lb in).

  3. Connect the heated seat control module electrical connections.
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear .
    Fig 1: Connecting Heated Seat Control Module Electrical Connectors & Installing Fasteners
    G01800392Courtesy of GENERAL MOTORS CORP.