Using Scan Tool

To enter programming using scan tool, perform following actions:

1. Connect scan tool to Data Link Connector (DLC).
2. Turn ignition switch to RUN position.
3. Select correct vehicle and model year.
4. Select BODY.
5. Select PERSONALIZATION.

Continue with following steps to program automatic door locks.

1. Select SET OPTIONS.
2. Select DRIVER #1 AUTOMATIC DOOR LOCK MODE OR DRIVER #2 AUTOMATIC DOOR LOCK MODE.
3. Highlight desired mode from following choices. See MODES OF OPERATION  for mode descriptions:
   • Mode 0.
   • Mode 1.
   • Mode 2.
   • Mode 3.
   • Mode 4.
   • Mode 5.
4. Exit from menu.