LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2000 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to DISABLING SYSTEM .
  2. Remove the knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
  3. Disconnect the steering column control module electrical connectors (2).
    Fig 1: Disconnecting Steering Column Control Module Electrical Connectors
    G01783737Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering column control module (2) from the lower steering column wire harness shield (1) by pulling the module outward (to release retaining clips) and sliding downward.
    Fig 2: Removing Steering Column Control Module
    G01783738Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals