LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2000 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the steering column control module (2) to the lower steering column wire harness shield (1).
    Fig 1: Installing Steering Column Control Module
    G01783739Courtesy of GENERAL MOTORS CORP.
  2. Connect steering column control module electrical connectors (2).
  3. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
  4. Enable the SIR system. Refer to ACTIVATING SYSTEM .
    Fig 2: Connecting Steering Column To Module Electrical Connectors
    G01783740Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals