LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2000 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (HVAC Systems - Automatic) >> Removal & Installation >> Compressor Hose Assembly >> Removal

Compressor Hose Assembly: Removal

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. See RECOVERY, EVACUATION & RECHARGING in GENERAL SERVICING PROCEDURES article in GENERAL SERVICING.
  2. Remove the air cleaner assembly. Disconnect the battery. Remove the suction line retaining bracket. Disconnect the compressor suction hose from the accumulator and discard O-rings.
  3. Remove the compressor discharge hose from the condenser and discard O-rings. See Figure.
  4. Remove the engine splash shield. Disconnect the left engine oil cooler line from the oil filter adapter.
  5. Disconnect the A/C pressure switch.
  6. Remove the bolt that retains the compressor hose assembly at the compressor and discard seal washers. See Figure. Remove the compressor hose assembly from the vehicle.
scientia non olet · About LEMON Manuals