Outside Mirror System Check
NOTE:
Perform this check before diagnosing symptoms. If system does not operate as specified in test step, proceed to appropriate diagnosis and testing procedure under SYSTEM TESTS
unless specified otherwise.
- Place mirror select switch in LEFT position. Operate mirror in all directions. Left outside mirror should move as commanded.
- Place mirror select switch in RIGHT position. Operate mirror in all directions. Right outside mirror should move as commanded.
- If vehicle is equipped with memory mirrors, press MEMORY 1 button. Single beep should be heard and both mirrors should move to programmed position for position No. 1. If system does not operate as specified in this test step, go to MEMORY SYSTEMS - DEVILLE & ELDORADO article.
- If vehicle is equipped with memory mirrors, press MEMORY 2 button. Single beep should be heard and both mirrors should move to programmed position for position No. 2. If system does not operate as specified in this test step, go to MEMORY SYSTEMS - DEVILLE & ELDORADO article.
- If vehicle is equipped with memory mirrors, press EXIT button. Left seat should move to programmed position for EXIT for last programmed driver. If system does not operate as specified in this test step, go to MEMORY SYSTEMS - DEVILLE & ELDORADO article.
- Turn ignition on. Place shift lever into Reverse position. Right outside mirror should tilt down approximately 7 degrees or to end of travel.