Ignition Control Module (IDI): Installation
WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 1999 Saturn SW2, 1999 Saturn SW1, 1999 Saturn SL2, 1999 Saturn SL1, and 1999 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
DO NOT wipe grease from module or coil if module is not being replaced. If installing a NEW module, spread silicone grease on metal face of module and on cover where module seats. Grease is included with NEW module and is necessary for module cooling purposes.
To install, reverse removal procedure. Tighten screws and bolts to specification. See TORQUE SPECIFICATIONS .