Ignition Switch
WARNING: This page is about a different car, the 1997 Cadillac Catera. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect ignition switch and lifter magnet 7-pin connector, mounted to ignition lock cylinder. Using DVOM, check for continuity between specified terminals with ignition switch in specified position. See IGNITION SWITCH CONTINUITY TEST . See Fig 1 . If continuity does not exist as indicated, repair as necessary.
IGNITION SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals (Wire Color) |
|---|---|
| OFF | "Y" (RED) & "U" (BRN) |
| ON | "Y" (RED) & "W" (RED); "Y" (RED) & "U" (BRN); "W" (RED) & "U" (BRN) |
| Bulb Test | "Y" (RED), "W" (RED) & "V" (BRN) |
| START | "Y" (RED), "W" (RED) & "Z" (BLK/RED) |