Security Indicator Always On Or Flashing
- Perform CONTENT THEFT DETERRENT SYSTEM CHECK . Disconnect BCM Brown 32-pin connector C2. See Figure . Turn ignition switch to ON position. If security indicator light is not illuminated, go to next step. If security indicator light is illuminated, repair short to chassis ground in Brown/Blue wire between BCM connector C2, terminal C06 and gauge cluster connector terminal No. 23. Perform CONTENT THEFT DETERRENT SYSTEM CHECK .
- Check all power and ground circuits to BCM. Repair as necessary. If circuits are good, replace BCM. See BODY CONTROL MODULE article. Perform CONTENT THEFT DETERRENT SYSTEM CHECK .