Sir Coil Assembly: Notes

CAUTION: Set front wheels in straight-ahead position before removing or installing coil assembly. This centers the coil assembly. If an off-centered coil assembly is installed, ribbon in coil assembly will break when steering wheel is turned. Always keep ignition switch in LOCK position to prevent wheel from turning and allowing SIR coil to become off-centered. To center the coil assembly, see SIR COIL ASSEMBLY under ADJUSTMENTS.

NOTE: Use care not to pinch wires when installing components. After wiring is fed through column, attach CAUTION tag to wiring near connector at base of steering column. Tag is included in SIR coil assembly repair kit.