Mode F3 (ABS Snapshot)

Mode will help isolate intermittent problems by capturing data before and after trigger. If MANUAL TRIGGER is selected, Tech 1 will wait for ENTER to be pressed before storing data. Tech 1 stores data from 8 seconds before trigger and 8 seconds after trigger is activated. All stored information can be displayed and examined for conditions which might indicate a problem, but may not set a code.

If AUTOMATIC TRIGGER is selected, Tech 1 will capture data which deviates from normal conditions but may not set a code, such as driving over bumpy roads or railroad tracks. Condition may be caused by loose connections or intermittent wiring problems causing signal to drop out momentarily. While Tech 1 is waiting for a trigger, ENTER or F9 key may be used to force a trigger.