Trunk Lid Does Not Open When Trunk Lid Release Switch Is

PRESSED, BUT OPENS WHEN REMOTE FUNCTION ACTUATOR TRANSMITTER

TRUNK RELEASE BUTTON IS PRESSED

1. Connect scan tool to Data Link Connector (DLC). Press trunk lid release switch. If switch input is not received at Instrument Panel Cluster (IPC), go to next step. If switch input is received at IPC, replace IPC if no codes exist. See appropriate INSTRUMENT PANEL article.
2. Disconnect Driver Information Center (DIC) connector (Seville) or headlight switch connector (Concours and DeVille). Connect test light between ground and connector C1, terminal "J" (Yellow wire - Concours and DeVille) or connector C1, terminal No. 11 (Yellow wire - Seville). If test light comes on, go to next step. If test light does not come on, check for open circuit in Yellow wire. If circuit is okay, replace IPC. See the appropriate INSTRUMENT PANEL article.
3. On Concours and DeVille, connect test light between connector C1, terminal "J" (Yellow wire) and connector C2, terminal "E" (Black wire). On Seville, connector test light between connector terminals No. 11 (Yellow wire) and 15 (Black/White wire).
4. If test light comes on, replace headlight switch (Concours and DeVille) or DIC (Seville). If test light does not come on, repair open circuit in Black wire (Concours and DeVille) or Black/White wire (Seville).