LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1993 >> Seville Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Pcm >> Self-Diagnostic System >> Entering Self-Diagnostics

Entering Self-Diagnostics

  1. Turn ignition on. Simultaneously push OFF and WARMER buttons on Climate Control Panel (CCP). Continue pushing OFF and WARMER buttons until segment check appears (about 3 seconds) on Instrument Panel Control (IPC).
    NOTE: Failure of any segment to glow may result in inaccurate test results. Replace any inoperative segment display before proceeding with self-diagnostic process.
  2. When segment check appears (all segments glow), system has entered into self-diagnostic mode. Release both buttons. Driver Information Center (DIC) will display diagnostic codes. Diagnostic code level displays PCM codes first, followed by IPC, ACP and SIR codes (if so prompted).
  3. To proceed to desired level, press and release CCP panel HI (fan up) button for "yes" or LO (fan down) button for "no". Depress LO button to go to next test level (i.e., IPC?, ACP? or SIR?) or depress OFF button to return to next selection in previous test level.
  4. To exit diagnostics, press AUTO button on IPC. System will go back to normal vehicle operation.
scientia non olet · About LEMON Manuals