LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1993 >> Seville Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Self-Diagnostics >> DIC Messages >> CHECK WASHER FLUID Message

CHECK WASHER FLUID Message

  1. When washer fluid level switch closes for more than 15 seconds, it pulls IPC washer fluid input circuit down to low voltage. IPC detects this condition at IPC terminal D13 and displays message on DIC.
  2. If washer fluid is empty and message did not display, check for ignition voltage at IPC connector terminal C13 using DVOM. See Figure . If voltage is good, check for open in sensor or open in Black/White wire between IPC connector terminal D13 and washer sensor and between sensor and ground.
  3. If message displays with full washer fluid container, check for short to ground in Black/White wire circuit between IPC connector terminal D13 and washer sensor, and between sensor and ground.
scientia non olet · About LEMON Manuals