LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1991 >> Seville STS >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator >> Installation (Front)

Installation (Front)

  1. Install regulator to door inner panel.
  2. Connect wire connector to motor.
  3. Install rivets (using 1/4"x5/8" peel type rivets).
  4. Install Inner panel cam.
  5. Install water deflector. See WATER DEFLECTOR  . Install trim panel. See DOOR TRIM PANEL  .
Fig 1: Removing & Installing Front Door Window Regulator (Seville)
G00217804Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Front Door Window Regulator (Eldorado)
G00217805Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals