Notes On Intermittents

Engine running, manipulate the oxygen sensor and ECM wiring and connectors while observing ECM Data ED32. If the fault is induced, ED07 will jump below 0.37 volts and the "OFF" status light will go off. Manipulate CKT 413 ground to the engine and look for a loose ground eyelet or ground eyelet installed at wrong location. Check oxygen sensor connector terminals for corrosion or foreign material. Clean if signs of corrosion are evident. If lean engine operation is suspected, perform PFI SYSTEM CHECK  . An engine that is misfiring may have a lean oxygen sensor indication because of unburned oxygen in the exhaust stream. See 1989 TROUBLE SHOOTING - NO CODES -- ALLANTE article to diagnose the misfiring. If the oxygen sensor circuit appears to be OK, go to PFI CHART A-9  , to check for faulty or contaminated sensor.