LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1986 >> Seville >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Engine Control Systems >> EXPERTEC TSB (T86-79)

EXPERTEC TSB (T86-79)

Publication date: 1986-07-31
Reference number: T86-79

EXPERTEC TSB

EXPERTEC TSB

TECHNICAL SERVICE BULLETIN

Reference Number(s): T86-79, Date of Issue:  07/31/86

IDLE SURGE AND/OR CODE 30 - LOSS OF POWER

Model(s): ALL Cadillac W/HT4100 Engines

Bulletin No.: Cadillac T86-79

Date: 07/31/1986

MODELS AFFECTED

ALL WITH HT4100 ENGINES

SERVICE INFORMATION

The following information will summarize the appropriate service operations for vehicles which experience abnormal distributor drive gear wear. This information supersedes Bulletin T-86-24 which should be destroyed.

Some Cadillacs equpped with the HT4100 power system may experience abnormal or premature distributor gear wear. The symptoms of this condition are idle surge and/or code 30 or loss of power. If these conditions are exhibited, the following service procedures should be followed:

SERVICE PROCEDURE

  1. Remove ignitior, distributor as described in Section 6D of the appropriate Service Information Manual.
  2. Inspect both the drive gear on the camshaft and the driven gear on the distributor shaft for evidence of advanced wear.
  3. If either gear is worn, the following three actions must be completed:

A. Replace the distributor driven gear. A redesigned gear, P/N 10499163 has recently been released to supercede 1979546. This new gear is identical to previous designs except that a tin plating operation has been added to improve break-in characteristics and minimize premature tooth wear. It can be easily identified by its "silvery" appearance. GMWDD service stock of distributor assemblies has also been updated with this improved part.

B. Replace the camshaft. P/N 1628822 is used for all engines. Refer to Builetin T-84-90. Be sure to prelube all contact surfaces including the distributor drive and driven gears with the lubricant provided in the cam kit (lubricant available separately as P/N 1052365).

C. Remove the engine oil pan and oil pump and inspect the oil pump gears and housing for wear. Replace oil pump and clean oil pan as required.

WARRANTY INFORMATION

For warranty purposes, use labor Operation T6135 with the following appropriate time.

WARRANTY INFORMATION

Vehicle Time
1985-1996 FWD Fleetwood and De Ville 9.6 Hours
1982-1995 RWD De Ville and Brougham 8.6 Hours
1982-1985 Eldorado and Seville 10.4 Hours
1986 Eldorado and Seville 10.7 Hours