Repeat steps 1)
and 2)
if adjustment was necessary to recheck proper operation of ISC. TPS may need adjustment if idle speed is too low. Reconnect harness connectors and install air cleaner assembly.
NOTE:
Enter diagnostics, clear trouble codes and exit diagnostics after each adjustment procedures to clear ISC malfunction code. This code may be set from disconnecting ISC during adjustment procedures.
TIGHTENING SPECIFICATIONS
| Application |
Ft. Lbs. |
| Throttle Body Mounting Screws |
15 |
| Temperature Sensors |
15 |
| Fuel Filter |
15 |
| Fuel Pump |
INCH Lbs. 55 |