Intake Manifold Installation

Use gasket cement on both sides of new gaskets. Tighten capscrews to 30 ft. lbs. and nuts to 25 ft. lbs.

Fig 1: Cylinder Head Bolt Location

Courtesy of GENERAL MOTORS COMPANY

FILTERS & CLEANERS

Filter or Cleaner

⁽¹⁾ Service Interval

Oil Filter

⁽²⁾ 6 mos. or 6000 miles

Garb. Air Cleaner (Foam)

⁽³⁾ 12 mos. or 12, 000 miles

(Paper)

⁽²⁾ 2 yrs. or 24, 000 miles

Oil Filler Cap

⁽³⁾ At each oil change

Fuel Filter

⁽²⁾ Each Spring and Fall

P.C.V. Filter (In Air Cleaner)

⁽³⁾ At each oil change

(On Rocker Covers)

⁽³⁾ At each oil change

⁽¹⁾	Service more often if conditions warrant.

⁽²⁾

Replace.

⁽³⁾	Clean and reoil.