Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Intermediate Steering Shaft Boot Clamp |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Inner Boot Bolt | 9 N.m (80 lb in) |
| Intermediate Steering Shaft Lower Bolt | 42 N.m (31 lb ft) |
| Intermediate Steering Shaft Upper Bolt | 39 N.m (29 lb ft) |
| Steering Column Nut Refer to procedure for tightening sequence and torque values. |
Steering Column Replacement |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
| Steering Wheel Bolt @ Steering Wheel Shroud | 0.8 N.m (7 lb in) |
| Steering Wheel Bolt @ Radio Control Switch | 0.8 N.m (7 lb in) |
| Steering Wheel Bolt @ Automatic Transmission Manual Shift Auxiliary Position Switch | 0.8 N.m (7 lb in) |
| Turn Signal Switch Bracket Band Clamp | 5 N.m (44 lb in) |
| Automatic Transmission Electronic Control Bolt | 3.3 N.m (29 lb in) |
| Turn Signal Switch Bolt | 3.3 N.m (29 lb in) |
| Steering Wheel Spoke Cover Bolt | 3.5N.m (31 lb in) |
| Steering Wheel Horn Switch Bolt | 5.5 N.m (49 lb in) |
| Upper Intermediate Steering Shaft Upper Bolt | 42 N.m (31 lb ft) |