Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
The upper boot must be installed and connected to the lower boot correctly. If not, water could enter the boot and over time, corrode the steering shaft and/or penetrate the input shaft seal of the steering gear. If water enters the steering gear, it may cause loss of power assist.

Install the intermediate steering shaft inner boot (1).
Courtesy of GENERAL MOTORS COMPANY

When installing the intermediate steering shaft inner boot (1), ensure the inner boot is aligned properly with the intermediate steering shaft boot (2).
Courtesy of GENERAL MOTORS COMPANY

Visually inspect the intermediate steering shaft inner boot (1) and the intermediate steering shaft boot (2) connection and ensure there are no gaps between seals.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution .

Install the 3 intermediate steering shaft inner boot bolts (1) and tighten to 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Upper Intermediate Steering Shaft (3) - Connect - Upper Intermediate Steering Shaft Replacement