Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Engine Coolant Thermostat Housing Gasket |
| Water Outlet O-Ring Seal |
| Water Pump Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Engine Coolant Fan Bolt (LFY) | 5 N.m (44 lb in) |
| Engine Coolant Thermostat Housing Bolt (LFY) | 10 N.m (89 lb in) |
| Intake Manifold Cover Stud (LFY) | 9 N.m (80 lb in) |
| Radiator Air Front Lower Baffle Bolt (LFY) | 2.5 N.m (22 lb in) |
| Radiator Air Side Upper Baffle Bolt (LFY) | 2.5 N.m (22 lb in) |
| Radiator Air Upper Baffle Bolt (LFY) | 0.9 N.m (8 lb in) |
| Radiator Surge Tank Bolt (LFY) | 9 N.m (80 lb in) |
| Radiator Upper Bracket Bolt (LFY) | 22 N.m (16 lb ft) |
| Water Outlet Bolt (LFY) | 10 N.m (89 lb in) |
| Water Pump Bolt (LFY) | |
| First Pass: | 10 N.m (89 lb in) |
| Final Pass: | 45 degrees |
| Water Pump Pulley Bolt (LFY) | 10 N.m (89 lb in) |