LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2024 >> Enclave Essence, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure

Installation Procedure

  1. GM5733134Courtesy of GENERAL MOTORS COMPANY

    Steering Wheel (2) - Install

  2. Connect the electrical connector.
  3. If a NEW threaded component is being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded component is reused, prepare the threaded component using the following steps:
    1. Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
    2. Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Remove loose debris from internal and external threads using compressed air.
    4. Apply liquid thread locking adhesive in a strip along half of the length of the external threads, starting at the tip, just prior to installation. Adhesives, Fluids, Lubricants, and Sealers 
    4. CAUTION:

    Fastener Caution .

  4. Steering Wheel Bolt (1) - Install and tighten 45 N.m (33 lb ft)
  5. Steering Wheel Airbag - Install - Steering Wheel Airbag Replacement
scientia non olet · About LEMON Manuals