Installation Procedure

WARNING: This page is about a different car, the 2021 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Steering Knuckle - Secure
{F45} Wiring Harness (2) @ Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Wiring Harness Grommet (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Side Rail - Secure [2x]
{F45} Wiring Harness (2) @ Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Radiator Support - Secure
Wheel Speed Sensor Electrical Connector - Connect
Install the appropriate front wheelhouse liner. Front Wheelhouse Liner Replacement
Verify the repair is complete. Diagnostic Repair Verification