Rear Toe Adjustment
WARNING: This page is about a different car, the 2021 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Measure the wheel alignment. Wheel Alignment Measurement
Rear Suspension Adjust Link Nut (1) - Loosen
- Rotate the rear suspension link adjust bolt (2) as necessary to achieve the correct rear toe setting. Wheel Alignment Specifications
- Tighten the rear suspension adjust link nut (1) only enough to prevent the loss of the rear toe setting.
- Verify the rear toe measurement, readjust if necessary.
- Rear Suspension Adjust Link Nut (1) - Tighten - Adjust Link Replacement
- Remove the support and lower the vehicle.
CAUTION: