Installation Procedure
Windshield(1) - Install - Adhesive Installation of Windshields
Multifunction Relay Module Bracket(1) - Install - Multifunction Relay Module Bracket Replacement
Inside Rearview Mirror - (2)Install - Inside Rearview Mirror Replacement
{ If equipped }Inside Air Moisture and Windshield Temperature Sensor(2) - Install - Inside Air Moisture and Windshield Temperature Sensor Replacement
{ If equipped }Windshield Outside Moisture/Ambient Light and Humidity Sensor(2) - Install - Windshield Outside Moisture/Ambient Light and Humidity Sensor Replacement
- { If equipped }Front View Camera(1) - Install - Front View Camera Replacement
Windshield Multifunction Sensor Mount Bracket Cover(1) - Install - Windshield Multifunction Sensor Mount Bracket Cover Replacement (With UHX) , or Windshield Multifunction Sensor Mount Bracket Cover Replacement (Without UHX)
Windshield Garnish Molding(1) - Install - Windshield Garnish Molding Replacement
Air Inlet Grille Panel(2) - Install - Air Inlet Grille Panel Replacement
- Battery Negative Cable - Connect - Battery Negative Cable Disconnection and Connection
- Close the hood.
- Remove the double layer of masking tape around the perimeter of the painted surfaces.