LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2022 >> Envision Preferred, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Power Transfer Unit/Transfer Case - AAM) >> Repair Instructions - On Vehicle >> Power Transfer Unit Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Power Transfer Unit Bracket (2) - Install
    GM5064000Courtesy of GENERAL MOTORS COMPANY
    2. CAUTION:

    Fastener Caution

  2. Power Transfer Unit Bracket Bolt (1) - Install and tighten [2x] 22N.m (16 lb ft)
  3. Power Transfer Unit Bracket Bolt (1) - Install and tighten [3x] 22N.m (16 lb ft)
    GM5063938Courtesy of GENERAL MOTORS COMPANY
  4. Power Transfer Unit Heat Shield - Install - Power Transfer Unit Heat Shield Replacement 
  5. Front Wheel Drive Shaft- Right Side - Install - Front Wheel Drive Shaft Replacement - Right Side
scientia non olet · About LEMON Manuals