Circuit/System Verification

Verify that the keyless entry functions operate with all available keyless entry transmitters and that the vehicle lights flash on and then off when remote vehicle start is activated.
- If any keyless entry functions do not operate properly and the lights do not flash
  Refer to Keyless Entry System Malfunction .
- Go to next step: If the keyless entry functions operate properly and vehicle lights flash
Verify that no Diagnostic Status History or Start Disable items are present in the scan tool BCM Remote Start Diagnostic Status History and the ECM Remote Vehicle Start Disable History parameters.
- If remote vehicle start disable history items are present
  Refer to the appropriate subsection in which the malfunction occurred.
- Go to next step: If remote vehicle start disable history items are not present
All OK.