LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2022 >> Encore AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Rear Suspension) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 
Application Specification
Metric (English)
Rear Shock Absorber Bolt@Rear Lower Control Arm Torque mating fastener
Rear Suspension Adjust Link Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Lower Control Arm Outer Bolt Torque mating fastener
Rear Suspension Trailing Arm Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Trailing Arm Bracket Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Upper Control Arm Inner Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Upper Control Arm Outer Bolt Torque mating fastener
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 
Application Specification
Metric (English)
Rear Shock Absorber Bolt@Body 58 N.m (43 lb ft)
Rear Shock Absorber Nut@Rear Lower Control Arm
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Stabilizer Shaft Insulator Clamp Bolt 58 N.m (43 lb ft)
Rear Stabilizer Shaft Link Bolt 58 N.m (43 lb ft)
Rear Stabilizer Shaft Link Nut 58 N.m (43 lb ft)
Rear Suspension Adjust Link Nut
  • First Pass:
 80 N.m (59 lb ft)
  • Final Pass:
 30 - 45 degrees
Rear Suspension Lower Control Arm Inner Nut 160 N.m (118 lb ft)
Rear Suspension Lower Control Arm Outer Nut
  • First Pass:
 150 N.m (111 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Suspension Shock Absorber Upper Mounting Nut@Rear Shock Absorber Mount (without F45) 20 N.m (15 lb ft)
Rear Suspension Shock Absorber Upper Mounting Nut@Rear Shock Absorber Mount (with F45) 25 N.m (18 lb ft)
Rear Suspension Upper Control Arm Outer Nut
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 90 - 105 degrees
Rear Wheel Hub Bolt
  • First Pass:
 100 N.m (74 lb ft)
  • Final Pass:
 15 - 30 degrees
scientia non olet · About LEMON Manuals