LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2022 >> Encore AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Keyless Entry And Remote Function Systems) >> Diagnostic Information and Procedures >> DTC B1ADF >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the Programming and Setup procedure for the control module that set the DTC.
  2. Verify the DTC does not set after programming.
    • If the DTC sets after programming 

      Replace the control module that set the DTC.

    • Go to next step: If the DTC does not set after programming 
  3. All OK.