Fastener Specifications
WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Brake Master Cylinder Bracket |
| Brake Master Cylinder Reservoir Grommet |
| Brake Pedal Pushrod Retainer |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Master Cylinder Bracket Bolt | 22 N.m (16 lb ft) |
| Brake Master Cylinder Bracket Nut | 22 N.m (16 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 5-6 N.m (44-53 lb in) |
| Brake Pedal Bolt | 9 N.m (80 lb in) |
| Brake Pedal Bracket Nut | 9 N.m (80 lb in) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Electronic Brake Control Module Bolt | 3 N.m (27 lb in) |
| Front Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Front Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Front Brake Hose Bracket Bolt | 9 N.m (80 lb in) |
| Rear Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Rear Brake Pipe Fitting | 18 N.m (13 lb ft) |